Miele CVA 620 Operating Instructions Manual Download Page 41

Page: 41 / 80

Hot water

When it is switched on, the machine will dispense
hot water at any time for tea or other drinks.

Turn the selector clockwise to the In Operation
position (with or without lighting).

If the selector is already in this position with the
message "

Standby. . .

" shown in the display, the

machine is in energy-saving mode. Press ENTER to
switch it into operation.

The following will appear in the display:

Wait until the following appears in the display:

Place a suitable container (e.g. a tea cup) under
the hot water spout.

Press the hot water button

Hot water will be dispensed from the hot water
spout.

As soon as the container is full, press the hot
water button

again.

The machine will stop automatically if a
volume has been programmed in for hot
water and function "Prog. hot water" is

switched on.

Making coffee

Summary of Contents for CVA 620

















































































Search results

Summary of Contents for CVA 620

Reviews:

Related manuals for CVA 620

Brands by name

Popular brands

Miele CVA 620, Operating Instructions Manual

Search results

Summary of Contents for CVA 620

Reviews:

Related manuals for CVA 620

Brands by name

Popular brands