background image

When using electrical appliances, basic safety precautions should always be
followed, including the following:

Read all instructions before installation or use of the coffee system.

Please read these instructions
carefully to prevent accidents and
machine damage.

This appliance is for household use
only. Any other use is not
recommended by the manufacturer
and could be dangerous.

This appliance complies with current
safety requirements. Improper use of
the appliance can cause personal
injury and material damage.

The manufacturer cannot be held
responsible for damage caused by
improper use of the appliance.

Electrical safety

Before connecting the appliance to
the electrical supply, make sure

that the voltage and frequency listed on
the data plate correspond with the
household electrical supply. If in doubt,
consult a qualified electrician.

Be certain your appliance is
properly installed and grounded by

a qualified technician.
To guarantee the electrical safety of this
appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician. The manufacturer
cannot be held responsible for
damages caused by the lack, or
inadequacy, of an effective grounding
system.

The appliance must be built into
cabinetry before operation to

ensure that no electrical components
are accessible. Ensure that electrical
power is not supplied to the appliance
while installation work, repairs or
maintenance is performed.

Do not use an extension cord to
connect the appliance to electricity.

Extension cords do not guarantee the
required safety of the appliance
(danger of overheating).

IMPORTANT SAFETY INSTRUCTIONS

4

Summary of Contents for CVA 615





























































Reviews: