Miele CVA 615 Operating And Installation Manual Download Page 10

Page: 10 / 60

Choosing a language

The language for the commands in the
message window should be selected
before the machine is used.

The following languages are available:
English, Spanish, French, German,
Dutch, Portuguese and Italian.

Turn the program selector
counterclockwise to "Program mode."

The following will appear in the
message window:

Programming option "LANGUAGE" will
be highlighted with an asterisk.

Press ENTER to select this
programming option.

The sub-menu will appear in the
message window.

Press the

button until the desired

language appears (english, espanol,
francais, deutsch, nederlands,
portugues or italiano).

Press ENTER to

save

this setting, or

turn the program selector to "0ff" to

cancel

if a mistake has been made.

All text in the message window will now
appear in the selected language.

Programming

Summary of Contents for CVA 615





























































Search results

Summary of Contents for CVA 615

Reviews:

Brands by name

Popular brands

Miele CVA 615, Operating And Installation Manual

Search results

Summary of Contents for CVA 615

Reviews:

Brands by name

Popular brands