Miele CS 1418, Operating And Installation Manual

Page: 7 / 76

Changing from metric to
imperial measurements
The weight can be displayed in kg or in
lb/oz.
The switch
a
for changing from metric
to imperial measurements is located in
the battery compartment.
^
Use the lever supplied to lift the
scales from the building-in frame.
Only use the lever supplied to lift the
scales from the building-in frame.
Do not use any metal implements as
these could scratch the frame.
^
Remove the scales with both hands
and place them with the underside
facing upwards on a clean, smooth
surface.
^
Open the lid to the battery
compartment.
^
Use a ball-point pen or similar to
push switch
a
to the right or left.
^
Replace the scales in the building-in
frame.
Switching on and weighing
^
Touch the ON/OFF sensor
s
.
"
8.8.8.8.8
" will appear in the display first
of all, followed automatically by "
0
" (kg)
or "
0.00
" (lb/oz).
The weighing function is now ready for
use.
^
If possible, the items to be weighed
should be placed in the middle of the
weighing surface.
The weight will appear in the display.
Switching off
^
Touch the
s
sensor until the display
goes out.
If the weighing function is not used for a
period of two minutes, it will switch itself
off automatically.
Zero setting
You can set the display to zero to add
items to those already weighed.
^
Touch the
s
sensor.
0
will appear in the display.
You can keep setting the sensor to zero
to weigh additional items.
en-GB
7