Cleaning and care
68
Cup sensor
The cup sensor is located underneath
the central spout.
Clean the cup sensor daily by hand with
warm water and a little washing-up
liquid.
Push the two locking catches
together (see arrows).
The cup sensor will be released.
Clean the cup sensor.
To refit it:
Push the cup sensor from underneath
into the holder on the central spout.
Stainless steel milk flask
The milk flask should be taken apart
and cleaned every day.
Clean all parts
by hand only
using
hot water, a little washing-up liquid
and a soft cloth. Use the cleaning
brush supplied to remove milk
residue from the milk pipework if
necessary.
Rinse all parts carefully under running
water.
Residual washing-up liquid can affect
the taste of milk from the machine and
the quality of the milk froth.
Dry all parts afterwards.
Reassemble the milk flask.