Miele CM 5310 Operating Instructions Manual Download Page 57

Page: 57 / 76

Frequently Asked Questions

Problem

Possible cause and solution

F73 or

Check the brew unit

The brew unit cannot be positioned correctly.



Switch the coffee machine off with the On/
Off button





Unplug the coffee machine. Wait for two minutes
before inserting the electrical plug back in the
socket.



Remove the brew unit and rinse under running
water.



Push the coffee ejector of the brew unit into the
correct position.



Do not insert the brew unit. Close the service
panel and switch the coffee machine on with the
On/Off button



This will initialize the brew unit motor and put it back
into the start position.



When

Insert the brew unit

appears in the display, put

the brew unit back in the appliance. Close the
service panel.

Summary of Contents for CM 5310













































































Search results

Summary of Contents for CM 5310

Reviews:

Related manuals for CM 5310

Brands by name

Popular brands

Miele CM 5310, Operating Instructions Manual

Search results

Summary of Contents for CM 5310

Reviews:

Related manuals for CM 5310

Brands by name

Popular brands