Miele CM 5310 Operating Instructions Manual Download Page 11

Page: 11 / 76

IMPORTANT SAFETY INSTRUCTIONS



For repairs, the coffee system must be disconnected from the

electrical power supply.
The coffee system is only disconnected from the power supply if

- The power cord has been unplugged.

Unplug the cord by pulling on the plug, not on the cord.

- The fuses to the household power supply are turned off.

- Any screw-in fuses in the household supply are fully unscrewed.



Never open the outer casing of the machine. Tampering with

electrical connections or components and mechanical parts is highly
dangerous to the user and can cause operational faults or electric
shock.



To protect against fire, electric shock and injury to persons do not

immerse cord, plugs, or coffee machine in water or other liquid.



Disconnect the coffee system from the power supply if it is not

going to be used for some time.



Only use genuine Miele accessories. If other parts are used,

warranty, performance, and/or product liability claims will be
invalidated.

Summary of Contents for CM 5310













































































Search results

Summary of Contents for CM 5310

Reviews:

Related manuals for CM 5310

Brands by name

Popular brands

Miele CM 5310, Operating Instructions Manual

Search results

Summary of Contents for CM 5310

Reviews:

Related manuals for CM 5310

Brands by name

Popular brands