Problem solving guide
60
Problem
Possible cause and remedy
The water container is
empty.
Fill and replace the
water container
has not
appeared in the display.
Droplets of water have settled between the water
container and the side walls of the housing, or this
area is damp (see illustration).
Dry these surfaces thoroughly. Take the water
container out to refill it with water.
There is too much residual water on the inside walls
of the water container, e.g. a biofilm has developed.
Alternatively, the water container has a build-up of
limescale.
Clean the water container every day.
Fill and replace the water
container
appears in the
display even though the
water container is full
and in the machine.
The water container is not in the correct position.
Remove the water container and push it back in
again.
The water container was not correctly filled and
refitted for descaling.
Fill the water container to the descaling symbol
and restart the descaling programme.
Fill and replace the water
container
appears after
switching on even
though the container is
filled and fitted in the
machine. The appliance
does not rinse.
The coffee machine needs descaling.
Switch the coffee machine off with the On/Off
sensor. Wait approx. one hour.
Switch the appliance back on again. As soon as
Heating-up phase
appears, touch the
sensor
control and then select
Descale appliance
.
Descale the coffee machine.
Summary of Contents for CM 5310 Silence
Page 71: ...Appliance dimensions INSTALLATION 71 a 241 mm b 360 mm c 460 mm ...
Page 73: ......
Page 74: ......
Page 76: ...M Nr 11 557 710 00 en AU NZ CM 5310 CM 5410 CM 5510 CM 5710 ...