background image

30

Parquet Twister floorbrush with
swivel action (SBB 300-3)

With natural bristles for vacuuming
smooth hard floors and small gaps.

Parquet Twister XL floorbrush with
swivel action (SBB 400-3)

With natural bristles for quickly vacu-
uming smooth hard floors and small
gaps.

Other accessories

(only available in selected countries)

Turbo Mini hand turbobrush (STB
101)

For vacuuming upholstery, mattresses
or car seats, etc.

Universal brush (SUB 20)

For dusting books, shelves, etc.

Radiator brush (SHB 30)

For dusting radiators, narrow shelves
and crevices.

Mattress nozzle (SMD 10)

For vacuuming upholstery, mattresses,
cushions, curtains, covers etc.

Crevice nozzle, 300 mm (SFD 10)

Extra long crevice nozzle for cleaning in
folds, crevices and corners.

Crevice nozzle, 560 mm (SFD 20)

Flexible crevice nozzle for vacuuming
hard to reach places.

XL upholstery nozzle (SPD 20)

Wide upholstery nozzle for cleaning up-
holstery, mattresses and cushions.

Electrical connection

All work should be carried out by a suit-
ably qualified and competent person in
strict accordance with national and
local safety regulations. The voltage
and rated load are given on the data
plate located underneath the vacuum
cleaner. Please ensure that these match
the household mains supply. The char-
ger is supplied with a cable and moul-
ded plug ready for connection to a
230V/50Hz AC single phase supply.

Test Marks

Electrical safety 
RCM Mark

Electrically sup-
pressed 
according to

CISPR 14.1

Summary of Contents for 11673540

































Reviews: