background image

 Switching on

Turn on the tap if it is turned off.

Open the door.

Touch the 

 sensor.

 Selecting a programme

Touch the sensor for the required

programme.

Further programmes can be selected

under 

.

 Selecting programme options 

(if

required)
You can select and deselect

programme options via the relevant

sensors and the display.
The selected programme option will

remain active for that particular

programme until the setting is changed.

Touch the sensor for the programme

option you want.

The relevant sensor will light up brightly.

 Activating the timer 

 

(if required)

Touch the 

 sensor.

Select the function you want using

the 



 sensors and confirm with

OK

.

Enter the required time for the timer

using the 



 sensors and confirm

with 

OK

.

 Starting a programme

Start the programme by closing the

door.

 Programme end - Switching off

At the end of a programme, the optical

in-operation indicator light will flash

slowly with the door shut. The signal

tones might also sound.
The programme has finished when

 

Finished

 appears in the display and

the door has opened slightly (if

applicable).

The drying fan may continue to run for

a few minutes at the end of the

programme.

Open the door.

The dishwasher can be switched off

at any time using the 

 sensor.

Confirm the query 

Switch appliance off

with 

OK

.

Risk of damage due to steam.

Steam from the dishwasher could

damage the edges of delicate

worktops when you open the door at

the end of the programme if the fan

is no longer running.
If you have deactivated the

automatic door opening function but

would still like to open the door at

the end of the programme, make

sure that you open the door fully.

 Unloading the dishwasher

Dishes tend to break and chip more

easily when they are hot. Allow the

dishes to cool until they are comfortable

enough to handle before unloading

them.

Summary of Contents for 11 872 630 / 01











Reviews: