Programmable functions
67
Control panel switch-off
status
To save energy, the time display and
the sensors will go out once the
programme has been running for
10 minutes. The
Start/Stop
sensor
flashes slowly.
However, there is no switch-off in the
event of a fault.
Options
=
Off
The time display and the
sensors do not go out.
=
On (factory setting)
The time display and the
sensors will go out once the
programme has been running
for 10 minutes.
Switching the display back on
- Touch the
Start/Stop
sensor. This will
not affect a running programme.
Memory
You can set the following: The
electronics will memorise the drying
level and any options selected for the
current drying programme. It will also
memorise the duration of the
Warm air
programme. When the programme is
selected the next time, these
memorised settings will appear in the
display.
Options
=
Off (factory setting)
= On
Anti-crease
After the programme has finished, the
drum will continue to rotate at intervals
for a max. of 2 hours. This helps
prevent creasing if the laundry is not
removed immediately after the end of
the programme. The duration can be
shortened.
Options
= no Anti-crease
= 1 hour
=
2 hours (factory setting)
