Settings
32
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the pro-
gramme.
If spots appear on crockery and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme, and the actual con-
sumption after the end of the pro-
gramme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
previously run on your dishwasher (see
“Caring for the environment” chapter,
“EcoFeedback consumption ”display
section).
Display Consumption
Select the
Consumption display
menu
option and confirm with
OK
.
Select the setting you want and con-
firm with
OK
.
Display Total consumption
Select the
Total consumption
menu op-
tion and confirm with
OK
.
You can display the values for
Energy
and
Water
using the
buttons.
You can also reset the values for the
total consumption to 0.
Select the
Reset
menu option and
confirm with
OK
.
Select the
Yes
menu option and con-
firm with
OK
.
Confirm the message with
OK
.
The values are now reset to 0.
Summary of Contents for 11 522 040
Page 2: ......
Page 45: ...Loading the dishwasher 45 Cutlery tray Heavily soiled crockery ...
Page 93: ......
Page 94: ......
