Miele 11 522 040, Operating Instructions Manual

Page: 20 / 96

Guide to the appliance
20
Display functions
The display is used to select or set the
following:
- The programme
- The timer
- The Settings 
The display can show the following:
- The programme stage
- The estimated time left for the pro-
gramme to run
- The energy and water consumption
(EcoFeedback)
- Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the

button to switch the dish-
washer back on.
The OK button is used to confirm mes-
sages or settings and also to move to
the next menu or another menu level.
Under  Further programmes/settings ,
a scroll bar

will appear in the right of
the display. This offers further options.
These options can be shown using the
 buttons.
You can alter the dishwasher’s controls
to suit changing requirements in the
Settings menu (see “Settings” chapter).
The option that is selected will have a
tick
 next to it.
To exit a sub-menu again, press the

Back button.
If you do not press any buttons for sev-
eral seconds, the display will revert to
the previous menu. You may then have
to enter your settings again.