Using the ironer
18
Temperature selection buttons
The ironer temperature can be set either via the temperature selection buttons (
/
/
) or
alternatively via the
or
–
buttons.
When adjusting the machine from a higher ironing temperature to a lower ironing temperat-
ure, the heater plate must cool down first. In this case, the heater element for the ironer is
switched off. The
red symbol indicates that the current ironer temperature is still too
high. When the
symbol goes out, this indicates that the selected temperature has been
reached.
Setting the ironing temperature
Press the
button on the control panel to access the ironing temperature selection
mode.
The
button will then be highlighted with a bar underneath.
Now press one of the three temperature selection buttons.
(For example,
temperature selection button)
The selected temperature selection button will be highlighted with a bar underneath and
the heater plate heated / cooled to the appropriate temperature.
Changing the value of a temperature selection button
Press the temperature selection button you want to change the value for.
When keeping the button pressed, the bar will light up underneath it and the current tem-
perature value will appear in the display.
Press the
or
–
button to set the temperature you want to save for that button.
Then press and hold the temperature selection button highlighted with a bar underneath
until it flashes once.
The new temperature value is now saved for that temperature selection button.
Speed of ironer
Iron type
Symbol
Speed range
m
/
min
Preset value
PRI318:
Low speed range
1.5–2.4
2.0
Medium speed range
2.5–3.4
3.0
High speed range
3.5–4.6
4.0
PRI418/421:
Low speed range
1.5–2.9
2.0
Medium speed range
3.0–3.9
3.5
High speed range
4.0–5.4
4.5
