Operation
45
Starting a program
Start the program by closing the
door.
The program starts.
The in-operation indicator comes on to
show that a program has been started.
A program should only be cancelled
in the first few minutes, if at all.
Important program stages could
otherwise be omitted.
Time display
The estimated duration of the program
selected appears in hours and minutes
in the display before the program
begins. During the program, the time
left until the end of the program is
displayed.
Each program phase is indicated by a
symbol:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
End
The displayed program duration may
vary with the same program. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process of the water
softener and the amount of dishes.
The times shown in the program
overview refer to standard test loads
and temperatures.
Each time a program is run, the
electronic module calculates the
program duration required depending
on the temperature of the water taken
into the dishwasher and the amount of
dishes.