Settings menu
85
DOS flow rate
A flow rate of 60 ml/min is set as
standard. The flow rate can be modified
between 10 and 150 ml/min in
increments of 5 ml/min.
Set the dosage according to the
cleaning agent manufacturer's
recommendations.
Choose the required detergent or
flow rate quantities and confirm your
selection with the
OK
button.
Venting the dispensing system
The DOS system will not dispense
reliably if there is air in the system.
The DOS system must be vented:
– when the DOS system is being used
for the first time,
– if the liquid detergent reservoir was
not refilled in time and the DOS
system was emptied,
– if the detergent container was
replaced.
To ensure that the dispensing
system functions properly, prior to
venting make sure that the detergent
container is full enough and that the
dispensing lances are firmly attached
to the containers.
Select
Start venting
and press the
middle button to confirm.
The venting process will begin. The
remaining time appears in the display.
The “Pre-wash” programme is offered
directly after the venting process is
finished. Start the programme in order
to dilute and drain any cleaning agent
that has escaped into the wash cabinet.
Temperature unit
The temperature can be shown in the
display in degrees Celsius or degrees
Fahrenheit.
Select the setting you want and
confirm your choice with the
OK
button.
High temperature final rinse
For better drying, the rinse temperature
can be increased for individual
programmes. This function is not
available for all programmes (see
“Programme chart”).
Select the setting you want and
confirm your choice with the
OK
button.
Summary of Contents for PG 8132 SCi XXL
Page 40: ...Loading the dishwasher 40 Cutlery tray Heavily soiled crockery...
Page 42: ...Comparison tests 42 Capacity 15...
Page 43: ...Comparison tests 43...
Page 95: ......