Miele professional PG 8132 SCi XXL, Operating Instructions Manual, Page: 45 / 96

Operation
45
Refilling or changing containers
The DOS module is equipped with a
level indicator which shows the
message
Refill detergent in the display
when the level drops below the
minimum.

As soon as the message appears in
the display, refill or replace the
container with a full one at the end of
the programme.
 Confirm the message shown with the
OK button.
Replace the container in good time
to prevent the dispensing system
being emptied completely.
An empty dispensing system must
be vented before starting the next
programme.

Place the container on the open
cabinet door or on a surface which is
easy to clean.

Unscrew and remove the siphon.
Place the siphon on the open cabinet
door.
 Replace the empty container with a
full one.

Push the siphon into the opening of
the container and screw it on tightly.
Observe the colour coding.
 Wipe up any spilled process chemical
thoroughly.

Place the container on the floor
beside the dishwasher or in an
adjacent cupboard. The container
must be at the same level as the
machine and not be placed on top of
or above the machine.

The DOS system must then be
vented.
To vent the system and adjust the
dosage amount, see
“Settings menu - External
dispensing”.
Checking consumption
Monitor the amount of process
chemicals used by regularly checking
the level in the container in order to
detect any dispensing irregularities.