Never clean the machine near or
with a water or high pressure hose.
Before servicing, disconnect the
power supply by either removing
the fuse, unplugging the unit or
manually "tripping" the circuit breaker.
The following points should be
observed to avoid damage to the
machine and the loads being
cleaned.
Use only resins which are tested by
Miele. If in doubt contact the Miele
Applications Specialist.
The resins are made for one time
use only. Dispose of them
accordingly.
Please follow the advice on
installation in this manual and the
separate Installation Instructions.
To avoid any corrosion damage
ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine.
Using accessories
Only specific equipment made by
Miele should be connected to this
machine. Consult Miele on the type and
application of such equipment.
Disposal of an old appliance
Cut off the cable directly behind
the appliance and at the plug to
prevent misuse. For environmental and
safety reasons ensure the machine is
completely emptied of any residue,
water and resins. (Observe safety
regulations and wear safety goggles
and gloves). Make the door lock
inoperative, so that children cannot
accidentally shut themselves in. Make
appropriate arrangements for the safe
disposal of the machine.
The manufacturer cannot be held
responsible for damages caused by
not observing the Important Safety
Instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
6
