Miele professional G 7895 Operating Instructions Manual Download Page 5

This machine conforms to current
safety requirements. However,
inappropriate use can lead to
personal injury and property
damage. To prevent accidents and
machine damage, read all
instructions before using this
machine. Keep these instructions in
a safe place, and make them
available to future users.

Use

This machine is designed for use
as described in these Operating

Instructions. Using it for purposes other
than those for which it was designed
would be unauthorized and could
cause harm. The manufacturer cannot
accept responsibility for damage
resulting from improper use or
operation.

The installation of this unit at non
stationary locations (e.g. ships)

must be performed by a qualified
installer or service agency, in strict
accordance with national and local
safety regulations and standards.

Please pay attention to the following
notes, to maintain safe procedures.

The machine should be
commissioned and then

maintained only by a Miele Authorized
Service Technician.

Do not install the machine in an
area where a danger of explosion

or freezing may be present.

Be certain this appliance is
properly installed and grounded by

an authorized technician. To guarantee
the electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system.  It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system
checked by a qualified technician. The
manufacturer cannot be held
responsible for damage or injury
caused by missing or defective
grounding, such as electric shock.

A damaged machine is dangerous.
Turn off the power immediately and

call an authorized Miele Service
Technician.

Repair work may only be carried
out by a Miele Authorized Service

Technician. Repairs by unqualified
persons could be dangerous.

Personnel operating the machine
should be trained regularly.

Untrained personnel must not be
allowed access to the machine or its
controls.

Water in the machine is not suitable
for drinking.

IMPORTANT SAFETY INSTRUCTIONS

5

Summary of Contents for G 7895

















Reviews: