Miele professional DOS-Modul G 10, Fitting Instructions Manual

Page: 6 / 28

G 7804
a
= electrical supply connection
neutralising agent
b
= dispenser hose connection
neutralising agent
90 cm wide machines
a
= electrical supply connection
rinsing agent / neutralising agent
b
= dispenser hose connection
rinsing agent / neutralising agent
For wall mounting the DOS module two
screws (4.8 x 32) and two plugs (8 mm)
are included with the unit.
Dimensions:
^
Mount the module in a suitable loca-
tion on the wall.
^
Connect the dispenser pump and
electricity supply.
^
Adjust the position of the cover caps
along the siphon tube so that the
tube will reach the bottom of the con-
tainer.
^
Fill the storage container with the rel-
evant agent, feed the siphon tube
into the container and tighten the
cover cap securely.
DOS-Module venting and dispensing
instructions are given in the Operating
Instruction booklet for the machine.
Installation and connection
6