MIE Completto standart, User Manual

Page: 29 / 53

User manual
10
PRE-STARTING PROCEDURE
•
Insert the iron's steam hose plug into the corresponding socket on
steam generator vessel.
•
Turn on the water escape valve of steam generator and add no
more than 700 ml of clean cold water into the boiler (we
recommend using distilled water).
•
Screw the water escape valve tightly.
•
Switch on the steam generator.
•
Set the iron temperature controller to the maximum position.
"Attention! When you first turn on the iron, set it to the maximum
temperature for a few minutes before using. There can be a smell of
burning and light smoke, which is considered normal for first time use.
The iron coating is adapting to high temperatures. Direct the first
escaping vapor onto a cloth, the steam may leave with remains of
chemicals used in manufacture of the iron and steam condensate".
•
When the iron has reached the desired temperature, the indicator
lamp on iron will go out. Be sure to wait for the maximum heating
of iron.
•
When the green indicator light of steam readiness on the steam
generator vessel lights up, you can start ironing.
•
To release steam, press the steam button on iron handle. For
continuous steam supply, push the button forward and lock it by
pressing. When ironing without steam, the steam button is not
used.