MIE Completto standart, User Manual

Page: 21 / 53

User manual
2
INFORMATION
CAUTION
•
Never immerse the iron and steam generator in water.
•
Before connecting the appliance to the electrical network, make
sure that the voltage indicated on the appliance matches the
electrical network voltage. Connecting to the electrical network
with voltage, different from the one shown on the type plate may
cause the ironing system to malfunction or breakdown. The electric
safety of ironing system is guaranteed only if it is connected to an
electrical network that has protection earth.
Manufacturer is not responsible for the damages caused by the
absence or breakage of protective earth wire (for example, electric
shock). It is not allowed to connect the ironing system to the electrical
network via multiple socket-outlet or extension cord, as they can not
provide the necessary security. Place the unrolled power cable so that
it does not interfere with movement of people in room.
•
Do not use the appliance if plug, power supply cord, steam
supply hoses, or the appliance itself are in any visible damage,
or if the appliance has been dropped or has water leaks.
Damaged power cable must only be replaced with a special
cable of the same type. For security reasons, the cable must
only be replaced by an authorized technician or ¬service
representative. Damage to the ironing table cover means threat
to your safety! Never use an ironing system without ironing table
cover.
•
Never leave the appliance unattended if it is connected to the
power supply.
•
This appliance can be used by children aged 8 and above and
persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge only if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
•
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made by children
without supervision. Make sure that children do not have access
to the system's steam supply hose or mains cable while the
ironing system is running or cooling.
•
Never allow the power supply cord and hoses of appliance to
touch the hot soleplate.