![background image](http://html1.mh-extra.com/html/midwest/shorestation/shorestation_owners-manual_1792997014.webp)
Midwest Industries, Inc.
Ida Grove, IA 51445 800-859-3028 0004549
Page 14 of 23 shorestation.com 12-3-
19
asd
2021-12-16
2
–
Prepare to drive into the lift
The first time your boat is put on the lift, the proper
position of the boat should be marked or referenced
so that the driver can easily identify the correct
position of the boat on the lift. This avoids
accidentally driving too far into the lift and causing
damage to the lift or boat.
When approaching the lift, unlock the remote control by pressing the
UP and DOWN buttons at the same time for more than 3 seconds until
the mode 1 light starts to flash.
Ensure that your lift platform is low enough by looking at the reference
mark the lift. If needed, use the remote control to run the lift down or
up to properly position the lift platform.
3
–
Drive into the lift
With the remotes unlocked and the boat lift platform lowered, slowly
drive into the lift at idle speed and stop the boat when positioned at the
reference mark.
Use mode 1 (first light
flashing) of the remote
control to run the lift up
until the boat is secured
by the lift platform and
all passengers can safely
disembark from the
boat. Do not raise the
boat totally out of the
water with passengers
in the boat.