Gauntlet: Dark Legacy
7
Chapter 1 Setup
11. Refer to Cabinet Wiring Diagram (Wiring Chapter), and ensure all cable connectors are correctly
secured. Do not force connectors, which are keyed to fit in only one location. Bent pins and reversed
connections may damage your game and void the warranty.
12. Place one lockwasher and one flatwasher onto each bolt in spare parts bag. Align control section holes
with main cabinet holes. Install one bolt with its washers through control section and into each
threaded cabinet hole. Tighten all bolts securely.
13. Place one cover cap washer onto each screw in spare parts bag.
14. Locate wood filler panel inside control section. Reach inside coin door to retrieve.
15. Place wood filler panel over bolt access opening in control section. Align wood filler panel holes with
control section holes. Install one screw with its washer through wood filler panel and into each control
section hole. Repeat installation for remaining wood filler panel, then tighten screws firmly. Snap dec-
orative cover caps over screws.
16. Locate line cord in spare parts. Match holes on IEC plug with prongs in receptacle and push firmly to
seat line cord. Route cord away from cabinet wheels and heavy foot-traffic areas.
LINE CORD INTO POWER SUPPLY
17. Plug game into a grounded (3-terminal) AC wall outlet. Switch AC power on at ON/OFF switch on
center left rear of cabinet. Gauntlet: Dark Legacy powers up and begins self-diagnostics. If no errors
are found, Attract Mode begins.
