background image

CPX-950

www.midtronicseurope.com

Midtronics BV Hoofdveste 6-8 3992DG Houten

6

7

 

 

CPX-950

Main Menu Icons

Icon

Description

12V Battery

Automates battery testing for quickly testing in or outside of the vehicle using the fewest steps.

 

24V System

Battery testing or generating a battery pair for 24V systems using the fewest steps. 

History

Access archived test histories or search test history by VIN or by technician.

Messages

Displays alerts and notifications for upcoming tests and activities including scheduled tests,  tool 

software updates and maintenance opportunities.

Settings

Setup/adjust:  WiFi, email settings, default language, display settings, information, shop information

i

Version

Retrieve info of the current software version. 

Initial Power Up

When powered up for the first time, the tester will take approximately 8 to 10 seconds to boot up 

while testing the integrity of the internal software.
The LANGUAGE screen is the first to appear.  It enables you to set the language for the display and 

printed test results. You can disable this option in the Admin Menu.

1. 

Use 

 or 

 to select the default LANGUAGE and press NEXT to continue.

2. 

This product has a EULA (End User License Agreement), which you can find on www.midtron-

icseurope.com/eula. Before starting the use of your tool, read this EULA. By using the tool you 

agree to having read, understood and agreed to the contents of our EULA. 

3. 

Next you are requested to add your preferred date setting (MMDDYYYY or DDMMYYYY) and 

the time setting (24-hour or AM/PM) and the actual time. The date can only be changed by 

Midtronics service centers. 

4. 

Next up a WiFi connection can be made. Connect to a WiFi network of press SKIP to continue. 

5. 

Your changes are saved and the Main Menu is displayed on the screen.

Inspecting the Battery

Before starting the test visually inspect the battery for:

 

Cracked, buckled, or leaking case. If you see any of these defects, replace the battery.

Controls & Connections

  Display Screen

  Cooling Vent

  Arrow Keys & Power 

Button

  Micro-USB Port

  Temperature Sensor

  VID Barcode Scanner 

(optional)

  Clamp Tabs

Main Menu

  

12.74V

CPX-950

12V Battery

 

24V System

 

History

Messages

Settings

i

Version

 

Menu Bar

12.74V

Battery Voltage  

(if connected)

WiFi signal strength

Controller internal battery status

 

Main Menu Selection Area



When displayed, the Screen Arrows show which 

ARROW

 key on the keypad to press to display other 

icons or screens.  When displayed under a list of options, the Screen Arrows show which keypad arrow to 

press to highlight a character or item in a list.

Additional Screens

The dots at the bottom or side of a menu or results screen indicate additional screens are available.

Summary of Contents for CPX-950 EU
















Reviews: