background image

CPX-950

Midtronics BV Hoofdveste 6-8 3992DG Houten

28

8 – Maintenance & Troubleshooting

Willowbrook, IL USA
Phone: 1.630.323.2800

Canadian Inquiries
Toll Free: +1 1 866 592 8052

MIDTRONICS HEADQUARTERS

MIDTRONICS B.V. EMEA

MIDTRONICS CHINA

MIDTRONICS INDIA

European Headquarters
Houten, The Netherlands
Serving Europe, Africa, the Middle East
Phone: +31 306 868 150

China Operations 
Shenzhen, China
Phone: +86 755 2374 1010

Navi Mumbai, India
Phone: +91 22 27564103/1513 

Asia/Pacífic (excluding China) 
Contact Corporate Headquarters 
Phone: +1.630.323.2800

167-000929EN-A  19/06 

©

2019 Midtronics, Inc. All rights reserved.

PATENTS

LIMITED WARRANTY

This product  is made by Midtronics, Inc., and is protected by one or more U.S. and 
foreign patents. For specific patent information, contact Midtronics, Inc. at +1 630 323-
2800.

Midtronics products are warranted to be free of defects in materials and workmanship 
for a period of two (2) years from date of purchase. Midtronics will, at our option, repair 
or replace the unit with a re-manufactured unit. This limited warranty applies only to 
Midtronics battery testers and does not cover any other equipment, static damage, water 
damage, overvoltage, dropping the unit, or damage resulting from extraneous causes 
including owner misuse. Midtronics is not liable for any incidental or consequential 
damages for breach of this warranty. The warranty is void if owner attempts to 
disassemble the unit or to modify the cable assembly.

Excluding cables.

Diode Test Results

Decision

Action

 

EXCESSIVE 

RIPPLE

One or more diodes in the alternator are not functioning or there is stator damage, which is 

shown by an excessive amount of AC ripple current supplied to the battery.

  Make sure the alternator mounting is sturdy and that the 

belts are in good shape and functioning properly. If the 

mounting and belts are good, replace the alternator. 

 

OPEN PHASE

Replace the alternator.

 

OPEN DIODE

 

SHORTED DIODE

Decision

Color

Example

500 Rated

 Good Battery

= 450 measured

 

Good Recharge

= 250 measured

 

Charge and Retest

N/A

 

Replace Battery

= 150 measured

 

Badcell, Replace

= 0 measured

The circle size is based on a (calculated) charged battery condition. 

Summary of Contents for CPX-950 EU
















Reviews: