MidNite Solar MNROSIE7048M, Owner'S Manual

Page: 30 / 57

MNROSIE7048 MANUAL
30| P a g e 1 0 - 4 3 2 - 1 R E V : -
VOICE
•
Levels of Chattiness:
o
Off - No voice .
o
Rick Mode – Not used with the Rosie.
o
Errors - Any errors such as "Over voltage," “Battery High Temp,” etc.
o
Warnings - All errors and warnings.
o
Verbose - Menu help messages the first time the menus are accessed. Information
messages such as status, charge stage and all warnings and errors.
o
Chatty Cathy - Menu help messages every time the menus are accessed, all the
warnings, errors and status info as described above, plus random hidden messages.
•
Quiet Time:
o
Quiet Time Disable = Talks 24 hours a day.
o
Quiet Time Enable = Has Start Quiet and End Quiet time settings. When activated,
Voice will be silenced between the times listed during a 24-hour period.
SETUP / BATTERY CONFIG
•
Absorb –
Sets the Absorb charge cycle voltage. This comes from the battery
manufacturer. Sometimes called “Bulk,” “Constant Voltage,” or “Boost” charge voltage.
•
Absorb Time –
Amount of time the Rosie stays in the Absorb charging cycle. Lithium
batts usually have no to little Absorb time. Flooded and sealed usually use this formula:
(Batt Bank 20hr Ah rating / Charging Amps) x 0.42 = Absorb Time
•
Absorb Skip Days –
Rosie goes to Float for XX days, as programmed.
•
Float –
Sets the Float voltage. Float is like a trickle charger, occurs after the Absorb cycle.
Keeps batts full remainder of day.
•
Float Time –
Amount of time Rosie stays in Float.
•
EQ –
Sets the Equalization (EQ) battery maintenance cycle voltage. Not applicable with
Lithium batteries.
•
EQ Time –
Amount of time in EQ. Best to EQ in one-hour cycles, let batts rest, measure
the specific gravity of every cell. EQ until the cells are at or less than 0.025 S.G. apart.
•
Rebulk –
Battery voltage setpoint, below Float, that once reached causes the Rosie to start
a new charge cycle … Bulk – Absorb – Float.
Figure 14