Hawke’s Bay
Manual
30| P a g e 1 0 - 4 2 5 - 1 R E V : - F W : X X X
FIRMWARE UPDATE
1.
Download to your cell phone the H
awke’s Bay
firmware (FW)
from the MidNite Solar website using this link …
https://www.midnitesolar.com/firmwareIndex.php
2.
Install the FW on your phone.
3.
Energize the Hawke’s Bay by closing the battery breaker.
4.
FW app will appear as shown in
Figure 18
.
5.
Tap the label that reads MNGP2.
6.
The FW app will connect to the Hawke’s Bay, then the app will
appear as shown in
Figure 19
.
7.
Tap the box that reads MNGP2 Standard.
8.
FW app will appear as shown in
Figure 20
, select OK.
9.
FW app will show transfer progress,
Figure 21
.
10.
FW app will indicate when done,
Figure 22
. Select OK.
11.
Repeat to load Hawke’s Bay FW.
Figure 18
Tap
Here
Figure 19
Figure 20
Figure 21
Figure 22
Firmware updates require Internet access AT the device.
WARNING!
