MNBCLNA BB Manual
11| P a g e 1 0 - 5 6 0 - 1 R E V : -
5.
Lay backplate on workbench; attach Barcelona to backplate,
aligning the keyholes (
Figure 4
) to the studs on the backplate;
slide down into locking position.
6.
Attach Breaker Box below Barcelona, aligning keyholes.
7.
Wire Barcelona to the Breaker Box now (Page 12).
8.
Mount the assembly to the wall using lag bolts.
9.
Ensure mounting hardware is sufficient for the weight of the
assembly and the mounting surface material.
Mounting
–
Barcelona and Breaker Box without Backplate
1.
Place Barcelona on wall at mounting location.
2.
Mark holes for mounting hardware to hold Barcelona to wall.
3.
Pre-drill pilot holes.
4.
Based on mounting hardware, either:
a.
Hold Barcelona to wall and install mounting hardware through the keyholes, or
b.
Install top two mounting hardware bolts, then attach Barcelona, then install
bottom two bolts.
c.
Secure mounting hardware.
5.
Repeat for Breaker Box:
a.
Hold Breaker Box below Barcelona, be careful of pre-
attached wires and busbars.
b.
Ensure the Breaker Box is fully mated to the
Barcelona.
c.
Mark for holes, pre-drill.
d.
Install mounting hardware and secure.
6.
Ensure mounting hardware is sufficient for the weight of the
assembly and the mounting surface material.
7.
Wire Barcelona to Breaker Box, page 12.
Be careful of the pre-installed wires in the Breaker Box
when mating the Barcelona to the Breaker Box.
Figure 4
Summary of Contents for Barcelona Breaker Box
