Midland XT-30, Instruction Manual

Page: 33 / 82

XT-30 instruction guide | 7
Let’s communicate!
To turn on/off the radio
Hold down
MENU/
for 3 seconds.
Channel selection
Press once the Menu button and then select the desired channel by the ▲/▼
buttons. Press
PTT
to confirm the selection. Remember that both radios must
be set on the same channel.
Transmission
Keep pressed the
PTT
button. The display will show
“Tx”
and
“to”
. Release the
PTT and the radio beeps to confirm to other users that your transmission has
finished ( ‘Roger Beep’, see paragraph).
Reception
Simply release the PTT button. When you receive a signal “Rx” is displayed..
Volume adjustment
Press the
▲/▼
to adjust the volume at the desired level.
button / CALL function
This feature is very useful to avoid accidental pressure of the buttons. Press and
hold the
“ /CALL” button for more than 3 seconds. The icon confirms that
the keypad lock is activated. Only PTT and /CALL will still be active. Repeat
the same procedure to unlock the keypad.
Sending an audio signal (CALL)
By pressing quickly /CALL ,you will send an audio signal to other users on the
same channel.