Model T70 Series
Page 9
midlandusa.com
Optimum Conditions are:
Over water
Open rural areas without obstructions
Flat areas where you can see the other person
To ensure you get maximum range:
Be sure to use fresh or fully charged batteries - low batteries will
cause low power conditions.
Be sure you are on a GMRS channel - FRS channels are
restricted by the FCC to low power.
Be sure to set your radio to use Hi power.
T70 SERIES QUICK REFERENCE CHART
MONITOR
Pressing and holding the
MONITOR
button for 3 seconds will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This could also be used to check any activity on
your current channel before transmitting.
Press and hold the
MONITOR
button for 3 seconds again to get out
of
MONITOR
mode.
SCAN
Your radio can scan all 36 channels for activity. To enter, quickly press
the
SCAN
button. Repeat the same procedure to exit. Your radio will
rapidly scan each of the 36 channels and stop on any active channel
for 6 seconds before resuming scan.
When you press the
PTT
button to transmit on an active channel, the
scanning function will stop and remain on the active channel. To
resume scanning, quickly press the
SCAN
button.
MENU
Channel
VOX
1~36
Privacy
Roger Beep
On/Off
Power
H/L
Call Alert
1~5
WX Channel
1~10
Silent Operation
On/Off
oF/1/2/3
CTCSS
DCS
1~38
1~83
WX Alert
On/Off
WX Scan
1~10
Press and hold UP/WX
button for 5 seconds
oF
1~10 for T75
Vibrate
On/Off
T75 only
Summary of Contents for X-Talker T60 Series
Page 1: ......
