
Model T70 Series
Page 11
midlandusa.com
TRANSMIT (TX) POWER LEVEL SELECTION
Your radio has 2 power level settings. To select the power level on
channels 1~7 and 15~36, press the
MENU
button until a “
Pr
” icon will
appear blinking on the display. Then press the
\
buttons to select
TRANSMIT POWER LEVEL
icon
(H:
Hi
/L:
Lo
)
. To confirm, press the
PTT
button or press the
MENU
button again to move to the next
feature setting.
When the PTT button is pressed during Lo Battery
Level condition, the TX Power will automatically switch from
Hi(H) to Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Lo power per FCC
regulations.
VOX
Your radio has 9 VOX level settings:
(oF/1~9)
.
To set
VOX
, press the
MENU
button until the display shows “
VOX
” .
On the right of the
CHANNEL NUMBER
display, an “
oF
” icon
appears. Select “
1
” ~ “
9
” by pressing the
\
buttons and push the
PTT
key, or press the
MENU
button again to move to the next feature
setting.
VOX
will be more sensitive on the lower setting than on the
higher setting.
To turn
VOX
off
, press the
MENU
button until the display shows
“
VOX
”. On the right of the
CHANNEL NUMBER
display, a “
1
” ~ “
9
”
icon appears. Select “
oF
” by pressing the
\
buttons and push the
PTT
key, or press the
MENU
button again to move to the next feature
setting.
ROGER BEEP (end of transmission) TONE
When the
PTT
button is released, the radio will beep to confirm to
other users that your transmission has finished.
To set the
ROGER BEEP
tone, press the
MENU
button until the
display shows an “
rb
” icon. Select “
on
” or “
oF
” by pressing the
\
buttons and push the
PTT
key, or press the
MENU
button to move to
the next feature setting.
!
Summary of Contents for X-Talker T60 Series
Page 1: ......