SERVICE MANUALS
Testing, alignment and service information are provided in the service
manual for this model. Service manuals for Titan™ radios are
available from Midland Radio Corporation at the address shown on
the back cover.
7
DO NOT
transmit more than 50% of total radio use time (50% duty
cycle). Transmitting for more than 50% of the time can cause FCC
RF exposure compliance requirements to be exceeded. This radio is
transmitting whenever the
TX
icon is displayed on the LCD. Pressing
the PTT switch on the side of the microphone normally causes the
radio to transmit.
Note: The preceding information is provided to make you
aware of RF exposure and how to ensure that this radio is
operated within FCC RF exposure limits.
You, as the qualified end-user of this radio device must control the
exposure conditions of bystanders to ensure the minimum separation
distance, stated above for satisfying FCC RF exposure compliance, is
maintained between the antenna and nearby persons. Transmit only
when all person(s) are at least the minimum distance from the
properly installed, externally mounted antenna.
IMPORTANT SAFETY INFORMATION
CAUTIONS
a
The antenna connector must be snugly tightened to maintain
proper electrical connection and moisture resistance.
a
Equipment must be grounded according to Midland Radio
Corporation installation instructions for safe operation.
a
Equipment should be serviced only by a qualified technician.
a
Refer to radio service manual for additional information on
installation and safety precautions.
WARNING!
!
DO
NOT
allow the antenna to touch or come in very close
proximity with the eyes, face, or any exposed body parts while the
radio is transmitting
!
DO NOT
operate the radio in explosive or flammable
atmospheres. The transmitted radio energy could trigger blasting
caps or cause an explosion.
!
DO
NOT
allow children to operate or play with this radio.
Note: The above warning list is not intended to include all
hazards that may be encountered when using this radio.
ii
