18
Getting Started
Inserting the Memory Card
Insert the memory card into the proper slot of the camcorder. Push the memory card until it clicks
into place.
To remove the memory card: push to eject the memory card out of the slot.
Note:
• Do not remove or insert the memory card when the device is powered on. This may damage the
memory card.
• Use class 10 micro SD cards (max capacity 64GB) for this camcorder.
• It is recommended to format the micro SD cards before the initial use.
Installing in Vehicles
Mount to Windshield
1. Attach the support to the device. Slide it into the support holder until you hear a click.
2. Clean the windshield before applying the suction-cup.
3. With the suction-cup laying flat, position the suction-cup and the DVR nearby the rear view mirror,
without blocking the line of sight.
4. Connect the bracket and DVR, hide the cable into the car ceiling.
5. When the cable reaches the top corner of the car door, insert the cable into the split as shown in
the picture (A).
6. Open the sealing strip on the edge of the car door, insert the cable along the strip up to the dash-
board (B).
7. Plug in the cigarette lighter as shown in the picture (C).
(A)
(B)
(C)
