Page 7
midlandusa.com
Model PPG1000
Charging a Device through the GFCI AC Output
1. Press and release the AC button on the power station. This will
activate the AC Outputs
2.
To turn off the GFCI AC Outputs, press and release the power button.
AC
AC
GFCI AC Output
LED Light
1. Press and release the power button to turn on the power station.
2. Press and release the LED button to turn on the LED light.
3.
To turn off the LED light, press and release the LED button.
Troubleshooting
1. If the GFCI outlet is tripped, it can be reset normally just like the ones
in your home. If the GFCI reset button is pressed accidentally when
the GFCI does not need to be reset, it is possible that the PPG1000
will falsely detect this as an error; since the GFCI outlet has not been
tripped, you can reset this error message by simply powering off the
PPG1000 for a few seconds, and restarting it.
2. In general, the PPG1000 will indicate an error by identifying the
impacted ports (AC, DC, USB 5V, or USB 20V), and the word “ERROR”.
If the PPG1000 indicates an error, simply turn the PPG1000 off for a
few seconds; if when you turn the PPG1000 back on the error persists,
unplug whatever device is responsible, as it may be incompatible or
faulty.
