Page 5
midlandusa.com
Model PPG1000
Features of the PPG1000 Waterproof Case
With the lid closed and properly sealed, the PPG1000 in its case has been
independently certified by a 3rd party lab as Waterproof to IP67
standards, according to test procedures outlined in IEC 60529; Although
the PPG1000 has been designed to be waterproof while the case is
sealed, Midland does not recommend deliberately exposing the PPG1000
to moisture even when closed. In order to protect your PPG1000, we
recommend the following steps be observed:
1. Ensure that the gasket in the lid of the case, and where the lid meets
the lower portion of the case are both free from obstruction and
undamaged.
2. Close the lid of the PPG1000 case, and secure both of the toggle
latches on the front of the case.
3. If the PPG1000 comes into contact with liquid while it is sealed, dry the
outside of the case thoroughly, taking care to wick away any moisture
where the lid meets the lower portion of the case; after opening the
case, continue to dry off any portion of the lid, gasket, and lower chassis
that may be accidentally exposed to moisture trapped outside of the
gasket.
Note: Do not turn the valve on the front of the PPG1000 case, as this
might damage the valve voiding the waterproof characteristics of the
valve.
Charging your PPG1000
The PPG1000 can be charged by an AC adaptor (Included), 12V DC Car
Charger, or by a solar charge.
DC Charging Port
12V ~ 30V
Quick Charging Port
Charge
12-30V DC Input
Charge
12-30V DC Input
Charge
12-30V DC Input
