
18 |
Midland G7 Pro user’s manual
MENU button
Channel selection
Press once the
MENU
button. The number of the channel will start flashing
on the display. Press the scroll buttons / to scroll up or down the PMR and
then LPD channels till you select the desired channel.
Press the
PTT
button to confirm, or wait for 10 seconds.
Refer to the table of frequencies.
CTCSS/DCS tones selection
Midland
G7/G7E Pro
can receive in two modes:
a. Open traffic:
in this case you will hear any communication transmitted on
the selected channel;
b. Group mode CTCSS/DCS:
CTCSS/DCS tones are access keys that al-
low you to receive only messages coming from parties using the same
channel and code. The speaker will remain muted until the correct tone is
received.
To activate 1 of 38 different CTCSS/104 DCS tones in RX and TX
1. Turn on the radio.
2. Select the desired channel.
3. Press twice
MENU
until the Display shows
oF
.
4. By pushing the / controls the display will show
CTCSS
(
ct
blinking) or
DCS
(
dc
blinking); press
MENU
to enter the CTCSS or DCS tones. Now
select the desired tone with the / keys.
5. To confirm the setting, press the
PTT
key or wait for approximately 10
seconds.
Summary of Contents for G 7
