12
- ENERJUMP
CHARGING ENERJUMP
1. Plug the wall adaptor into the universal socket.
2. Connect the 14V-1A input port of of
Enerjump
to the other end of the wall
charger.
or
3. Plug the car adaptor into the socket of the cigarette lighter.
4. Connect the 14V-1A input port of
Enerjump
to the other end of the car adap-
tor.
STARTING A VEHICLE
1. Make sure that
Enerjump
is properly charged (the number of the indicator lights
must be not less than 3).
2. Turn off all the accessories on the vehicle.
3.
Connect the red battery clamp of the jumper cable to the vehicle’s positive
(+)
battery terminal and connect the
black battery clamp to the vehicle’s negati-
ve
(-) battery terminal.
Pay attention to the polarity!
A reverse polarity con-
nection (positive to negative) may cause damage to
Enerjump
and/or create a
sparking/explosion hazard.
4. Plug the cord of the jumper cable into the jump start socket.
5. Press the BOOST key on the clamps’ circuit; then you will fi nd on the following
options:
-
Green led on:
the connection is correct and the circuit is working. You can