Midland D-200 instruction guide
| 13
Problem
Possible Cause
Solution
It is not possible to
communicate with
other parties
Incorrect CTCSS or
DCS
Check that the CTCSS
tone or DCS code
corresponds to the
one set by the parties
you are communica-
ting with.
Reception is fragmen-
ted and/or disturbed
The signal is very
weak.
Try temporarily disa-
bling the Squelch by
means of the Monitor
feature.
The transmission
distance is exces-
sive and/or there
are obstacles in the
transmission path
Move closer to the
party you are com-
municating with or to
another area.
Other parties are
using the same
channel
Check the traffic on
the radio channel by
means of the Monitor
feature and select
another channel if
required.
The radio has been
installed too close
to equipment that
causes interference
(televisions, compu-
ters, etc.)
Increase the distance
between the radio
and this equipment.
The autonomy of the
battery pack is limited
Transmission time is
too high.
Try reducing the
transmission time
and/or using a low
power.
