12 |
Midland D-200 instruction guide
Troubleshooting
Problem
Possible Cause
Solution
The radio doesn’t
switch on
The battery pack is
discharged and/or
has not been installed
correctly.
Verify that the battery
pack is charged and
that it has been cor-
rectly installed.
The radio switches
off shortly after it has
been switched on
Discharged battery
pack.
Recharge the battery
pack.
The battery pack does
not recharge
The battery-charger
has not been con-
nected or installed
correctly.
Inspect the connec-
tions of the battery-
charger and the
installation of the
batteries.
The radio switches
on but is unable to
receive signals
The site of installation
is too shielded.
Move to an another
area.
The volume is too low
Adjust the volume
level.
Incorrect CTCSS or
DCS
Check that the CTCSS
tone or DCS code
corresponds to the
one set by the parties
you are communica-
ting with.
It is not possible to
communicate with
other parties
An incorrect radio
channel has been
selected.
Select the same radio
channel used by the
parties you are com-
municating with.
The radio is installed
in a shielded area or is
too far from the party
you are communica-
ting with
Move to another area.
