Midland CT 890, Instruction Manual

Page: 27 / 36

Midland CT890 instruction guide | 23
X-TWRPT: the radio transmits and receives at the same time, exactly as
in a phone conversation; keep pressed the RPT key and the full duplex
mode is active.
With the programming software you can set the tx delay when you rele-
ase the
PTT .
RPT-SPK - MENU 38
This function deactivates the speaker when the repeater function is ena-
bled.
In Standby mode press
MENU + 38
; the display will show “
RPT-SPK
”.
Press MENU to enter the function. Push the
▼/▲
keys or rotate the enco-
der to select ON/OFF and confirm with MENU .
To return to the standby mode, press EXIT .
PTT - MENU 39
In this MENU you can disable the PTT when the repeater function is ac-
tive.
In Standby mode press
MENU + 39 ; the display will show “ RPT - PTT ”.
Press MENU to enter the function. Push the
▼/▲
keys or rotate the en-
coder to select
ON/OFF
and confirm with
MENU
. To return to the standby
mode, press EXIT .
Adding a channel to scan (SCAN ADD) - MENU 40
With this function you add a channel to the scan channel list.
To enable it, you must first set the radio to CH mode.
In Standby mode press
MENU + 40 ; the display will show “ SCAN-ADD ”.
Press MENU to enter the function. Push the
▼/▲
keys or rotate the en-
coder to select ON/OFF and confirm with MENU . To return to the standby
mode, press
EXIT
.
Alert tone (ALERT) - MENU 41
In this section you set the alert tone; you can choose amongst the fol-
lowing alert tones: 1750Hz, 2100Hz, 1000Hz and 1450Hz.
In Standby mode press
MENU + 41
; the display will show “
ALERT
”.
Press MENU to enter the function. Push the
▼/▲
keys or rotate the en-
coder to select one of above mentioned frequencies and confirm with