Midland CT890 instruction guide
| 21
Sending the ID code (ANI-SW) – MENU 32
With this function, you can send the identifier code of your radio.
In Standby mode press
MENU + 32
; the display will show “
ANI-SW
”.
Press
MENU
to enter the function. Push the
▼/▲
keys or rotate the enco-
der to select
ON/OFF
and confirm with
MENU
. To return to the standby
mode, press
EXIT
.
Setting the ID ANI code (ani-edit) – MENU 33
The identifier code is composed of 10 digits (0-9); the first one cannot
be 0.
The ANI code must be composed of 3 digits to 6 max.
In Standby mode press
MENU + 33
; the display will show “
ANI-EDIT
”.
Press
MENU
to enter the function. Edit the ANI code with the keypad and
confirm with
MENU
. To return to the standby mode, press
EXIT
.
DTMF (DTMF-ST) – MENU 34
With this
MENU
you can select the following options:
•
DT-ST:
if you press any key on the keypad during transmission, the
speaker will send out the corresponding DTMF tone.
•
ANI-ST:
when you press
PTT
, the speaker will send out the correspon-
ding ANI code.
•
DT+ANI:
when transmitting, the ANI code and the DTMF tones will be
activated by the speaker of the radio.
•
OFF
: DTMF disabled.
In Standby mode press
MENU + 34
; the display will show “
DTMF-ST
”.
Press
MENU
to enter the function. Push the
▼/▲
keys or rotate the enco-
der to select
ON/OFF
and confirm with
MENU
.
To return to the standby mode, press
EXIT
.
