7
E
N
G
LI
S
H
Redial
While the Intercom is in stand-by, long press the
Intercom
button on
your headset to redial the last number.
Voice recognition (VR)
The VR feature (voice recognition) allows you to answer or reject
incoming calls by voice control without having to remove your hands
from the handlebars.
By default this feature is enabled.
To deactivate this function: keep pressed simultaneously the
Up
and
Down
volume for 3 seconds.
Y
ou will hear two beep tone confi rming
the deactivation of the function. To activate it again, follow the same
procedure, you will hear one beep tone.
2
The best performances of this function will depend on the type of
helmet you use (close or open) and on the speed. Make some tests
in order to fi nd the optimal condition.
With the Voice Recognition feature disabled, you can answer the
incoming call only pressing the
CTRL
button.
Attention!
The Voice Recognition enable/disable feature effect only
the phone call answering and not the Intercom function
Volume control
Midland BT Intercom comes equipped with AGC technology to
automatically adjust the speaker volume to the optimal level based on
ambient noise and driving speed.
You may manually adjust the volume by pressing the volume buttons
one step at a time. For each volume step you adjust, you will hear a
short beep.
The AGC function for automatic volume adjustment, has the
priority over manual volume setting.
Volume -
press to decrease the
volume
press to increase the
volume