background image

Time  Setting:

Push  the  TIME  SET  knob  and  adjust  the  time.

A N T E N N Ą   C O N N E C T IO N

Any  Citizens  Band  beam,  dipole,  ground  plane  or  vertical  antenna  may  be  used.  A  ground  piane 

type  antenna  will  provide  good  coverage,  and  sińce  it  is  essentially  non-direetional,  it  is  ideal  in  base 
station  to  mobile  operation.  From  base  station  to  base  station  or  point-to-point  operation  a  di- 
rectional  beam  will  give  greater  distance  even  under  adverse  conditions.  The  range or the transceiver 
also  dépends  on  the  height  o f  the  antenna  so  whenever  possible,  select  the  highest  location  within 
F.C.C.  limits.

Whatever the  type  of antenna  selected,  it  is  important  that  it  be  properly  adjusted  and  matched and 

the  connecting  transmission  line  be  in  good  condition  so  as  to  avoid  a  high  VSWR  (voltage  standing 
wave  ratio).  A  VSWR  over  2.5  résulte  in  reduced  radiated  power  and  may  cause  instability  and 
damage  to  the  final  output  stage  of  the  transceiver.  The  VSWR  may  be  measured  with  the  built-in 

SWR  meter.

-   12  -

Summary of Contents for 13-898B
























Reviews: