Midland 13-898B, Manual

Page: 10 / 23

A N L -B L A N K E R PUSH SWITCH
With this switch placed in the released ANL position undesireable noise will be considerably reduced
in AM réception. When in the depressed BLANKER position annoying impulse noise will be blanked
out. This noise blanker circuit is effective for both AM and SSB réception.
»
CB-РА PUSH SWITCH
This transceiver may also be used as a PA (Public address) amplifier. Connect a suitable 4 - 32 ohms
PA speaker to the “ PA” jack on the rear panel. Depress CB-РА push switch and press the Push-to-talk
button on the microphone. For regulär 2-way communications, the switch must be placed in released
out [CB] position.
PHONE JAC K
When a headphone is inserted, it autornatically disconnects. the internal speaker.
REC JAC K
Both transmitting and receiving signais are supplied to the REC jack and can be recorded if a tape
recorder is connected to the jack. This jack is not affected by the setting of the Volume control
on the front panel. Therefore the record level must be adjusted by the record-level control of the tape
recorder connected.
E X J A C K
This transceiver can be operated as a simple audio amplifier if you place the channel selector switch
in the “ EX” position and connect an audio source to this EX jack provided on the rear panel. The
sound output from the speaker can be adjusted by tuming the front panel Volume control knob.
- 9 -