This problem is often attached to the midi device, but in reality it is a problem of
the sound card in your computer. Many sound cards have an adjustable latency
time, they are used to work with slow computers, and so audio is not interrupt.
At the installing of the sound card, the latency time is set to maximum value e.g.
512 samples, and this is too much, so your midi-notes are sounding delayed.
Adjust this value to a minimum that is possible for your computer, and you will
hear audio correct. But you can connect your keyboard to a sound expander too,
and you will see that’s no problem of your keyboard.
Midi Device is not recognize . . .
There are some misunderstandings, because a midi device is not recognizable by
computer, except USB. The midi standard does not support recognizing of
devices!
The
Midistart 3
is recognized by USB but not by midi-interface, this is normal!!
Pedal doesn’t work . . .
May be you have the wrong pedal type. There are two types of pedals in the
market: One is a pedal with an open contact, and if pressed it closed, and one is
with a closed contact and opened if pressed. The keyboard needs a pedal with an
open contact!
USB doesn’t work . . .
Is powerswitch on power-on position?
Is the keyboard is recognized by USB?
If you connect the keyboard by USB, it should be recognized.
Look at „Start
Æ
Settings
Æ
System control
Æ
System
Æ
Device manager at
Audio/Video/Game controller for the keyboard settings. If not install your USB
-driver!
Do you have set midi out port at your music program?
Please Check!
10
