MIDIPLUS Co, Ltd.
9
http://www.midiplus.com.tw
2.6 Setting
In order to assign a Controller Knob, Fader or Pad to a MIDI
Parameter (MIDI Controller) please follow these steps:
1. Press the MIDI/SELECT knob and then SET CTRL (Controller) key
(F3)
2. Choice number of knob on ten key groups (1 - 20) then press enter
3. Assign controller number on ten key groups (1-127) then press enter
4. Assign act channel number on ten key groups (1-16) then press enter
5. Finally, press MIDI/SELECT knob key again to finish assign knob.
Now you have assigned to one Control knob the MIDI Parameter
and the MIDI Channel. Repeat the same method for the other 16
real-time Controller Knobs and Faders.
2.7 Selecting and setting a presetbank
There are 15 presetbanks with predefined controller settings,
each with 20 controllers (Midichannel, Midicontroller Nr.) All settings
are stored in an EE-Prom to be sure at power off or battery change
state. At the end of this usermanual you can find a list with the
factory settings of the controllers. For selecting a presetbank press
MIDI/SELECT, then the OCTAVE UP or DOWN to increase or
decrease the banknumber you want to choose, then press ENTER.
Now you can use the new bank, with 20 new controller settings.
For setting a presetbank, please see part Assignment of the 20
Real-time Controllers!
