MIDIPLUS Co, Ltd.
8
http://www.midiplus.com.tw
ENTRY knob. By pressing MIDI/SELECT button and CC DATA key &
then the required number and finally the Enter key to finish. For
example, if you want to make Control Change 7 as value 123.
1) Press MIDI/SELECT knob;
2) Press CC No.(will be shown in display)
3) Choose 7 on numeric keypad;
4) Press enter key to specify Control Change as 7;
5) T
he display shows “---“
6) Press CC DATA.(will be shown in display)
7) Press number key 1, 2, and 3, then press enter key to specify
value 123 then press MIDI/SELECT knob to finish this action.
8) For Velocitiy, Referb and Chorus Depht, Pan Pos, Volumen you
only need to enter CC Data Value.
Please note for e.f.g.: after you press enter key the LED display
will show --- to indicate that you pressed enter key and will not
disappear until you press the MIDI/SELECT knob to finish your
choice. After you press cancel key the LED display will show blank to
indicate that you pressed cancel key and will not disappear until you
press the MIDI/ SELECT knob to finish your choice.
- Program Key
Pressing MIDI/SELECT and then the Program key, then the
numeric keys and then the ENTER key, you can select any patch
number between 1 to 127. For example, if you want to change voice
to 67 (Tenor Sax): Press the MIDI/ SELECT knob, the program key
and 67 on numeric keys, ENTER key and then MIDI/SELECT again
to finish this action.
