10
CONTROLS & INDICATORS
Power LED:
This red LED indicates that power is applied to the unit through the rear connector.
Transmit LED:
This red LED indicates that the unit is applying push to talk to the base station or repeater.
COR/MON LED:
This red LED indicates when a monitor output is turning off the CTCSS/DCS and monitoring the
standard carrier squelch or that carrier is detected on the base station radio.
Tone LED:
This red LED indicates presence of low-level guard tone.
F1-F2 LEDs:
The red F1 and F2 LED’s indicate which channel select output is active.
