background image

 

 

DDU-300 Manual Rev. 2006.02.22

 

1 S

PECIFICATIONS

 

Voltage/Current 
Operating Voltage (nominal)  ...............................12 VDC 
Operating Voltage (min-max)  .........................12-15 VDC 
Operating Current (standby @12 VDC) ................ 100 mA 
Operating Current (peak @15 VDC)..................... 500 mA 

Inputs 
Input Level (RX) .................................... 100-3000 mV p-p 
Input Impedance (RX) ...........................................> 10k

 

Outputs 
Output Level (TX, unloaded) ................. 150-2500 mV p-p 
Output Impedance (TX)...........................  27k

 if JU4 cut 

Speaker Audio Output ................................... 1 W into 8

 

Mechanical 
Dimensions: .................................. .2

"H x 6½W x 8¾"L 

Operating Temp ..............................................0° to 50° C 
 
Decode Format 
MIdian’s TVS-2 Kryptic format (4-digit) 

Other 
ANI Recall Stack Size  ................................................ .10  
Alias Database Size  ................................................. .137 
 
 

 

WARRANTY 

 

Midian Electronics, Inc., warrants this product to be 
free from defects in material and workmanship for 
two years from date of shipment. If such malfunction 
occurs, it will be repaired or replaced (at our option) 
without charge for materials or labor if returned to the 
factory. This warranty does not apply to any parts 
damaged due to improper use--including accident, 
neglect, unreasonable use, and improper installation--
or to unauthorized alterations or modifications of the 
equipment. It does not extend to damage incurred by 
natural causes such as lightning, fire, floods, or other 
such catastrophes, nor to damage caused by 
environmental extremes, such as power surges 
and/or transients. It does not extend to 
microprocessors, if it is determined by Midian that the 
failure of a micro is due to static damage, application 
of improper voltages to the unit, or other problems not 
related to circuit design. In such case or in the case of 
a desire to update the micro to a different version of 
software, such request must be specified in writing, 
and there will be a charge agreed upon by both 
parties. 
This product is warranted to meet published 
specifications and to operate as specified only when 
properly installed in radio equipment which complies 
with U.S. FCC specifications and the applicable radio 
manufacturer's specifications. Midian Electronics is 
not responsible for any operational problems caused 
by system design, outside interference, or improper 
installation. 

Equipment for repair can be returned to the factory 
without prior written authorization. A brief letter 
describing the nature of the defect should be included 
with the merchandise. Repair by other than Midian 
Electronics, Inc., will void this warranty. In-warranty 
merchandise must be shipped, freight prepaid, to 
Midian Electronics. Midian Electronics will return, 
freight prepaid via UPS ground, the repaired or 
replaced equipment to purchaser, within the United 
States. Out-of-warranty repairs will be billed at the 
rate of $60 per hour, plus replacement parts. 
This warranty applies to the original purchaser of the 
equipment only. Midian Electronics is not liable under 
this warranty, or any implied warranty, for loss of use 
or for other consequential loss or damage 
experienced by the purchaser. Some states do not 
permit the exclusion or limitation of implied warranties 
or consequential damages. This warranty provides 
special legal rights, and the purchaser may have 
other rights that vary from state to state. 
Copyright Notice 
The information in this manual and any software in 
this product remain the property of MIDIAN 
ELECTRONICS, INC. Reproduction, duplication, or 
disclosure is not permitted without the prior written 
consent of MIDIAN ELECTRONICS, INC. 

 

Summary of Contents for DDU-300























Reviews: